Corona Large 2 Door 5 Drawer Sideboard Pine Dining Room

Good quality sideboard. Looks very goodThis item takes a few hours to build but it is worth the effort. Very solid piece of furniture.

Needed something to tidy up under a worktop and this did the job perfectly and with a set of aftermarket handles looks great.Very time consuming to assemble but very easy, theres just a lot of bits to do. having done a few corona pieces im used to it, if your not using a power screw driver expect hand cramps, i use one to do the screws up most of the way and then nip them tight with a hand screwdriver that way you speed it up but minimise the risk of splitting or burying the heads because the wood is very softOnce assembled is becomes a very strong structure and being solid wood you can adapt it or strengthen it as you see fit,The finish is matt and semi smooth, not varnished and so if you wanted easy to paint( which i did consider)I would recommend varnishing the top, as it will soak up any liquids you spill on it

Love this furniture,It’s a bit tricky to put together but take your time and study the instructions very carefully.I did have a damaged part but I contacted the seller and they sent a replacement part.( the only reason I gave 4stars )The top of the cabinet is beautiful wood so I gave it a couple of coats of very thin varnish and lightly rubber down between coats and the result is a beautiful cabinet that looks very expensive and friends have complemented and can’t believe it’s a flat pack.Amazing value for money

Been 7 years since buying. Still looks okay

Excellent value for money - delighted with the quality - does take time to assemble - some tips - accessories (screws hinges etc come in 4 seperate packs with letters that identify each one ie A; B; C etc get 4 plastic trays for each packet and keep them all separate with their identifying tickets. That way you can keep referring back to the excellent instructions for assembly. Also follow the instructions for assemble exactly ie step 1 - step2 - step 3 and so on. Tip: you can use a power screw driver on the internal assembly parts but on the outside more noticeable screws etc take care and use a hand screwdriver to avoid slipping and marking the wood. Tip 3. Lay cabinet flat on its back when fitting doors. The hinge screw positions are marked with a pointed indentation put each screw half way into the wood at the mark for each hinge - do this without the hinge - do the same on the doors - put screws half way into the wood at the marked spot - then take out the screws and attach the hinges to the doors first - then line up the door take the screws out of the frames and then line up the frame part of the hinges with the holes made by the screws and put the screws back into the holes you have created - there is ample adjustment on both the door and frame parts of the hinges so don't worry - this makes a tricky job so much more simple - use a hand screwdriver for all the work on the front of the unit - less chance of slipping and marking the wood - good luck - it's well worth the effort - Brian K.

It’s not difficult to put together as long as you use your intuition to figure out which bits of wood fit where. The instructions aren’t the clearest, and there were multiple screw hole/placement holes missing, but all in all, a couple of hours to build solo, and looks decent when built.

This is a lovely stylish cabinet. Very easy to assembled as long as you follow the instructions and fantastic value for money. I now have 3 of these products and will probably end up buying more.

Good quality