Planet BikeFloor Pump Dual Head and Hose,Black

Very good way to adapt my air compressor to both Schrader and Presta valves. I removed the existing fitting and collar (they just pull out) from the supplied hose and mated a quick connect/nozzle fitting to the tubing, then held the hose on with a screw clamp. Works like a charm on all three bikes and three cars in the fleet without changing filler heads. Time will tell about durability but very good so far.Edit: Other posts discuss not putting the Presta fitting on too far or you won't get the pump head off again. This is true and it may be that the lock lever distorts the seal along its entire length, grabbing the threaded portion of the filler stem enough that it won't release with its own elasticity. At any rate the trick (so far) is to put the pump head about three or four threads past the top and no more - grab the stem there with your thumb and forefinger and then put the head on to keep it from going on too far. Seals fine and comes off easily.

Great customer service, very reasonably priced

Seems to be perfect fit !!! Works and fits well

Bought this as a replacement hose for my Bell floor pump and it was a perfect match for the old one.I was able to replace it in about 5 minutes. Pump works great again.

I previously ordered two of these and installed them successfully on two different floor pumps. After a number of months, they seemed to wear out, such that the pump head wouldn't stay seated on a Presta valve above 70 PSI. I ordered a third unit, but this one is a different size attachment and won't fit my pump. I would not order this product again.

I used this to repair a Joe Blow pump that had a broken head. The high pressure tubing fit the old pump just fine, using the Joe Blow pump's collar and fitting to attach it. Problem is with the head itself - the schrader side works fine. But when you use the presta side, the air just blows out through the unoccupied schrader fitting on the head. the schrader fitting does not close off so that the presta fitting can pressurize the tire. Have to use a little screw on schrader adapter on my presta tubes, and use the schrader port on the pump head, to make the pump work. Not worth it to return, as it would cost almost $6 to ship it back. So I'm probably just going to buy a new pump (from someone else).

The media could not be loaded. We came to a crossroads after getting a puppy. She would tear our nice thing up. She chewed up our bike pump hose. This is the only one I could find to replace the original. This Product works ok but not as smooth or nice as the original. This product is also less flexible than the original. I would buy again if I still can’t find anything better but our puppy stopped chewing things.

While this hose and attachment may be comparable for Planet Bike pumps, I have a Bell Air Attack Bike Pump and it fit perfectly. It appears that the threading is standard, so the fitting was flawless. I am so thankful to have found this because the pump I have has been a go to for me. The length of the hose exceeds what it replaced but that makes it all the more flexible for reaching the tire valve. If your hose is dry rotted like mine was, I recommend trying this instead of replacing the pump altogether.

Pas cher et bien

My old Schwinn pump was working anymore.I was looking for a bike head pump replacement but it wasn’t available at my local bike shop.MEC had low supplies and wasn’t sure of the fit.I did more research and decided on Planet Bike’s dual head. It fits perfectly!

Unfortunately this tube end did not fit my pump. It was the correct style - but slightly different size. I had to send it back and get a refund