Liquid Electical Tape

I bought this because I had several cords, ranging from ipad charging cables to the cord for my electric razor to the cord on the vacuum cleaner, whose insulation had become brittle and was cracked and/or missing. While not visually restoring the insulation to a “like new” condition, it does do a great job repairing the insulation and, in my opinion, looks and works better than electrical tape, especially if additional build up would interfere with using something like a cord clip/hook on an appliance. While it dries or sets fairly quickly (you can safely apply additional coats, if needed, after ~5-10 minutes, the product is somewhat “gloppy” and it will run or drip before it dries sufficiently that it won’t. When completely dry, it does seem to be fairly flexible. Based on my experience, I would suggest the following: - Suspend the cord/cable horizontally and then watch for and remove any drips until it sets. If the repair is being made near the plug/connector, hanging the cord vertically could cause the product to pool excessively at the plug. - Put plastic or paper below the cord to protect the floor or work surface from any drips from the brush or the cord. - If using the brush attached to the lid, clean the product off the stem first so that you don’t have more product than you want running down the stem and onto the brush. - Be sure to clean any material off the threads of the can and the can lid before closing the can. - Instead of using the brush attached to the lid, consider using a separate brush, like a small acid brush, and wiping any excess on that brush off on an old soup can instead of the threaded edge of the product’s can. Overall, this product worked great for my applications and exceeded my expectations.

ALWAYS works as advertised.

works better than i thought it would. you do have to build up layers, and it does act as a bit of a solvent on any existing insulation and softens it until the whole thing cures again, so be careful where you are covering nicks and tears because once it starts to melt the old insulation it might pull away or gap. once it is applied and cured in multiple layers it is very durable and the electrical cable is intact and very protected. the end result is way better than what you can achieve with electrical tape. it seems like a reasonable alternative to shrink wrap when shrink wrap is not feasible due to placement or location.

We have a Miele vacuum cord that is damaged in several spots (electrical tape did not work to repair) and the cord on our Nespresso machine got melted through to the wires (no damage to the wires) this product repaired both cords to safe protection and function. Several thin coats are needed but well worth the purchase.

I had never needed to use liquid electrical tape before, but Star Brite Liquid Electrical Tape has been a game-changer! I used it on the brake lights of my boat trailer, and it worked perfectly. Now, I can comfortably dip the back of my trailer into the boat launch without worrying about shorting out the electrical system. The application was super easy – just brush it on, and it dries quickly, forming a solid, waterproof seal that protects against moisture, saltwater, and corrosion. It's been great for peace of mind, knowing that my connections are secure and well-protected. If you need to protect any electrical connections from the elements, especially around water, this product is fantastic. Star Brite Liquid Electrical Tape is an excellent investment for anyone looking to safeguard their equipment from the harshest conditions!

It's good stuff. I ordered "COLOR: Clear", the photo showed RED, and I got black. I wish I needed black, because- like I said- it's good stuff. They need to fix the product page. And now having used it (and smelled it) for a couple of days, it seems for all the world exactly like rubber cement. So, I got some rubber cement and tried it in the same manner. Rubber cement remains tacky and this product doesn't.

Worked exactly like it should and cheaper than in stores

For what I use this for it's a 4 to 5 star product. The only similar product I've found is rated for a lower maximum temperature. That said I'm never able to use a little more than half of it before it dries enough in the bottle to become unusable. The cap simply does not seal well enough and it's very apparent by the strong odor. I've purchased this 4 times. The first bottle I didn't do anything extraordinary to seal it other than making certain the cap was secured after each use. I suspect I used 25% of the bottle. After that I saved the packing and, after each use, I used heavy duty clear plastic tape to seal it, completely around the perimeter, in the original package. That extended the usable life of the product but I still couldn't use 50% of the product before it became too viscous to apply. I finally found plastic pickle relish jar with a rubber seal. The package fits inside the plastic jar but with of course some air around it. That has allowed me to use about 50 to 60% of it and the additional plastic bottle perfectly seals the smell. I'm now looking for an inexpensive, air tight container, opaque (in case UV may impact life) to transfer the contents into. It is relatively thin but I normally use it under heat shrink without adhesive on the shrink wrap itself (adhesive lined shrink wrap is often low temperature and difficult to find in a long roll and I use a lot of heat shrink). It's extremely frustrating because I love the product but I hate paying for 2 to 4 times what I can use and I hate filling a landfill with the product I'm unable to use.

Got what I ordered and it works great. Used it on a Quadcopter I built and works well.

This is ideal for waterproofing electrical connections on boats and elsewhere, its very important to read the user instructions on this product before use. Brilliant and ideal for the purpose for which it was designed. I recommend this product.

منتج رائع مغلف بشكل جيد

This suff is brilliant for waterproofing electrical cable connections. It has a brush built into the lid, which makes it easy to spread on.

This is a very quick and clean alternative to the traditional option of grease tape. Excellent for consumer grade tasks such as sealing plus and connections on antenna and LNBs.