Feekoon 4 Pack Face Shield Replacement Lens, 15.5'' x 8'' Tinted Full Face Shield Compatible with Hobart 770580, Protective Safety Visor Replacement for Welding, Grinding, DIY, Cosplay Helmet

Purchased these shields to create a visor for a costumery helmet. Pros and cons for fabricating your projects: PROS: 1. Can easily cut into a rough shape using tin snips! The plastic will not shatter. 2. Easy to shape using a heat gun. Warm until it begins to bow and then press into the helmet and hold in place. Wear a thick, geat-resistatnt glove like oven gloves. 3. Shatterproof and robust! You're NOT going to accidentally crack this with saws, knives, drills, screws, etc. 4. Bonds with super glue (cyanoacrylate). It takes a while, but it will eventually dry. I recommend using a cement compound that chemically bonds the plastics together. 5. Nice and DARK - nobody will see your face through the visor. 6. Perfect thickness - not to thick nor thin. CONS: 1. Maybe a little TOO dark. This tint is perfect for outdoor applications. Indoor is a bit dim, such as in a convention center. If your helmet limits visibility on its own, consider anotheroption that is slightly less dark. 2. Susceptible to fogging damage from cyanoacrylate super glue fumes. I initially glued the visor into my helmet to heep it in place, but noticed some smoky effects near the glue points. INSTEAD OF GLUE, I recommend building in some solid points in 3D prints for small screw holes. Better yet, embed machine screw nuts into the 3D print along with a hole and drill a hole in the visor for a short bolt. Use some thread fastener on it to ensure they don't come loose.

Great product looks awesome great visibility will definitely use in the future

I needed this for part of my 8 year old son's costume. It worked really well for what we needed it for

Works great, cuts well with average safety scissors. If used for cosplay consider anti fog options to be applied later to the visor.

I got this visor for a Helldivers 2 Cosplay I was putting together, and while the helmet wasnt great for the visor, it definitely got the job done, especially for the low-cost. It doesn't fog at all, is a decent thickness so it bends but stays rigid, really useful, can fit almost anything, easy to work with as long as you have scissors, and the tint is perfect for cosplay. 10/10

These face shields were just the right color for my project. Great quality.

Used for a cosplay visor. These are quite deeply tinted compared to several other visors I tried, which is exactly what I wanted to be able to hide my eyes while seeing out of them. They are like strong sunglasses, so wearing them indoors in low lighting will make it difficult but not impossible to see. And in full daylight, my eyes were invisible from the outside. I was able to cut them with an ordinary pair of scissors though it took some effort. If you are considering these for cosplay, be aware that polycarbonate this thick is difficult to bend and practically impossible to cleanly crease without a jig for even heating and bending. But if you won't be needing to do much of that, these are perfect.

Bought this to make a visor for a helldivers helmet and it worked perfectly, easy to cut and looks good