TONOR Microphone Isolation Shield, Studio Mic Sound Absorbing Foam Reflector for Any Condenser Microphone Recording Equipment Studio, Black

This is a nice little unit from Tonor that blocks sound reflections from the equipment rack, monitor, and wall directly behind it. However, it is not designed to block reflections from elsewhere in the studio, nor does it — so I am adding acoustical foam on those spots. Be advised that there are some issues with the mounting hardware: 1) The screw adapter shown at the red arrow in photo 1 was not listed as a part online or in the accompanying instructions. Fortunately it was included because it is required to mount the acoustic baffle onto the 5/8" male thread on my mike boom. 2) Unfortunately, however, the capped black cylinder that suspends the mike terminates in a 3/8" male thread instead of a 5/8" male thread necessary to screw into the 5/8" female Audio Technica mike suspension mount. This required me to spend a few bucks on a chrome 3/8" female to 5/8" male adapter (shown at the green arrows in both photos). It's a minor quibble, but I advise potential buyers to check the thread size on their mike stands to see if it compatible with the included hardware. I was surprised because a 5/8" thread is standard with microphone mounts — at least in the USA. Perhaps this item was intended to be used with the Tonor mike shown in the ads. It would be nice if the online ad gives the thread specifications. Still, I recommend this mike baffle, even if you need to buy the extra adapter to make it work for you. Some reviews here suggest contacting Tonor about this or any other issue.

The TONOR Microphone Isolation Shield is bar none one of the best products of its type. It is easy to install as it has a universal mounting system. It even works with desk mounted boom arms. If using with a desk mounted boom arm realize this will add some weight to your set up. It actually is not a significant amount and my boom arm which is a Neewer NB-39 Adjustable 43.3" adjustable scissor arm was able to take the weight and did not move when in use. The screen performs well and blocks much of the ambient noise in my room. This greatly increased my sound quality. The product itself was constructed very well! It is very solid and I was most impressed with the workmanship of the screen. I recommend this product for anyone looking for a low cost portable method of improving their sound quality.

This thing is tiny I know it states that but until you get it you wont understand , so I couldn't use it the way it was ment to be used cause my mic was always exposed in some way I was about to pack it up for a return and was like you know what , I wrapped it directly around my mic right on top of my shock mount and it was a perfect little box almost like a Kaotica eyeball if you put a piece of foam on top to fully enclose it . So glad I did this had to modify It so it stay on shock mount but yeah it works and is satisfying to look at now

Can support its on weight

Update: 2019-01-07 ( Five Stars for Customer Service ) In my original review shown below, I gave the product a 1-star rating due only to the fact that it broke. I now increase the rating to an average of 3-stars due to outstanding 5-star customer service. TONOR customer service has been very good in addressing the issue I experienced with the Mic Shield. They replied up to my product review, and another member of their team also contacted me as a follow-up. We have worked together to resolve the issue with the Mic Shield, and for the great efforts by Tonor customer support and their willingness to seek a correction to the issue I have upgraded my over all rating. Honestly this was a great surprise and something I didn’t expect at all. Thank you very much to the Tonor customer service staff! Original Review: 2019-01-01 ( One Star due to broken product ) In general, it is an interesting and rather adaptive mic shield. The folding style construction allows for this to be packed up and moved from location to location with reasonable ease. As for the performance of this shield, that will vary with application and location. This is a reasonable small shield, so it won’t shield too much sound from the mic, or past the mic. The major draw-back is the product failure that happened within hours of installation. The threaded mount which is welded (or not) to the base of the shield, has fallen off. There appears to be 2 very small tack welds, which failed to penetrate the shield framework enough to hold. This item should be sent back for replacement, period, end of story. But, it was needed immediately so I fixed it. The attached images show the failed mounting point, part of the repair and the shield back at work. This repair won’t be available to most people, and the product should just be returned. For the price, this product should not have failed. Can't say that I would recommend this product.

I purchased this to reduce echo as I was limited on the changes I could make to my office. Installation isn't difficult but the instructions could have been easier to follow by using the name of the parts instead of the part numbers which meant I kept having to refer to the parts diagram (ie. "Mount the 6 onto the 7"). I am using a Snowball microphone and this didn't work with my shock mount as the base couldn't handle the distribution of weight would fall over. I was able to get it to work without the shockmount by being careful to adjust the tripod legs to distribute the weight evenly but I have to be careful not to accidentally bump it as it could easily fall over. While this is designed for a microphone that isn't as wide as the Snowball, it still gets the job done and my sound quality is much improved with it.

I bought this product to enhance my audio quality on my YouTube channel and product reviews. It is the perfect size for a Blue Yeti that sits on top of a desk/table. I have yet to mount my blue yeti. Maybe in the near future. The metal is thin, but high quality. My audio sounds cleaner and crisper. The audio I am sure is determined also by the mic quality and other accessories you might have to insulate audio. I only use a pop-filter and now the shield. It is easy to expand the shield and store away. The insulation is thick and does a great job of absorbing audio. Overall, I am very impressed by the quality, design, and value of the microphone shield.

A bit smaller than we anticipated but nice construction for the price.

Excellent stand for my needs

It's very useful for home studios. The Metal construction is sturdy and nicely finished. Very helpful for avoiding the unnecessary noise.

Jag rekommenderar den här produkten

Better quality that I’ve expected for the price tag, the stand it’s steady and well balanced on the carpet, the sound proof works very well for my amateur needs. No bad things to say about the product does his job well to my opinion

Un petit matériel simple et efficace qui permet de faire son travail !!! Je le recommande fortement…