Watercraft PWC Dolly Boat Stand Storage Trailer Cart Dock Slipway Cart Adjustable Bunks W/ 4 Casters and 2 Brakes Carpeted to Prevent Scratch 1000lb Capacity

I’ve read a lot of the 1-2 star comments and have a hard time believing some of the reviews. This is adequately built and felt solid after assembly. Instructions were more than good enough to properly assemble it. One of the reviews said the instructions were bad and another one blamed the bolts for the caster being too long. But really, if you’re mechanically inclined and have critical thinking skills, putting this together is easy. The bolts for the casters do point upwards or it will not clear the wheels but one of the reviews blamed the instructions and then they figured it out. Well worth the money. Unless this dolly buckles under the weight of my Waverunner FX SVHO, then my review should tell you all you need to know.

Easy to assemble, solid enough to do the job... obviously not the best quality. You definitely get what you pay for. Just be aware you can easily over tighten bolts and bend the metal inward. It’s a good value for what it is, which is a cheap functional jet ski dolly. The wheel locks do work great, and it rolls nicely.

Very nice stand. We had to drill holes to set the bunks wider but it wasn’t a big deal. Went together quickly.

4 1/2 stars.. Holds at least 1,000lbs fine - 900lb jet ski and me on top of it. Rolls around nicely and feels sturdy. I have a flat concrete floor (garage) to roll around on. I don't think I'd take on it something too rough, such as a pebble concrete. My only complaint is that I had to under to the bottom bolts of the support and turn them up to get an engine lift under it. They are perhaps 1" too low. While I had those supports only tightened with one bolt, I did not move it around.

I was immediately impressed with the packaging and quality of the product. All components were bubble wrapped and arranged neatly in the carton. As a result, no shipping damage observed and everything assembled easily. I believe they could add 16 ea 5/16” flat washers for the casters for a total of 32. The slotted holes are a little large for the head of the bolt or nut and I used extra flat washers I had. I can’t comment on the mounting of the bunks as I modified this for a kayak and used 3” pvc bunks. I will add that it worked perfectly for the kayak. It rolls easily and the brakes are a nice feature.

These were perfect and easy to assemble!

Never bought a PWC cart/dolly before. Was shocked by the price of others and after reading reviews I went with these. I bought two and I can say I’m satisfied. I will say the only real flaw is even with the reinforcements you can still over tighten bolts and crush the square tubing, ESPECIALLY THE VERTICAL BOLTS. If you crush the tubing by over tightening you could compromise the strength of the cart/dolly and it does not mention this in the instructions so just be warned. Only other thing that could be improved besides that and a little more detailed instructions is all of the bolts, nuts, and washers come in one package and are unsorted, not a huge issue but I found it annoying. This product will take you about a half hour to unpackage and assemble, only tools needed are 9/16 and 1/2 sockets and or wrenches. I also wanted to mention I have two 1999 Sea Doo GTX pwc’s and I had to assemble with the bunks at maximum width. I think these carts could easily be used for other purposes with little modifications as the top of the main frame is flat with holes pre drilled. Hope this review helps.

I did not use for a PWC. Instead, I wanted something I could modify to store my two kayaks. I build my own bunks and reverse mounted them using existing brackets. This worked out great. It looks clean and my kayaks are now stored correctly and easy to move around.

Seems fairly solid the brackets that the boards mount to the frame could have been little thicker ( just my personal preference), but still pleased with it