Sidekick Portable Folding All-in-one Work Bench, WX066

My husband loves this. Says it’s a must have. Sets up easily and folds up to store until you need it again. Very sturdy. Comes in handy for so many projects!!! And a happy hubby makes me happy!!!

Great little work bench! Very sturdy and easy to set up and take down 💯

After having one for a while, I came back here and bought a second one.These are really nice little work tables. I have used the one I have as a stand for my chop saw, to put furniture on for refinishing, and just for various stuff around the house.What I like about it most is that it weighs virtually nothing, meaning it is easy to carry to wherever I need to work, but once you actually set it up it is pretty sturdy and solid. Because the legs are metal, it is surprisingly strong. It takes about 5 seconds to set up or break down, and you can just pitch it into the back of the truck without worrying about whether it will survive back there. It is all metal and plastic, and although I don't think I have ever left it out in the rain, I think it would probably survive that just fine.

This is one the most cleverly designed tables I've ever seen. It's easy to carry (weighs under 13 lbs.), and is easily assembled and disassembled by one person. It takes less than a minute to unfold and have ready for use. When you're done, it takes less than a minute to fold it up (no tools needed).It's very stable. I weigh 165 lbs. And I laid across the table to check the stability. No wobbling. The top is made of a very durable reinforced plastic. It's hinged (folds in half), and transforms into a carrying case when not in use. The table top hinge is made of metal. For reference, there are inch and millimeter markings on the table top. And the top has an indented area that can be used to temporarily hold nails, screws, etc.The table comes with four (4) orange-colored pegs (clamps) If needed, the clamps can be inserted into holes in the table top to help secure things. When not in use, the clamps insert into the bottom side of the table top. The legs and support braces are made of metal, and have plastic/rubber feet.I have several of these tables. They're not just for workshop or garage use. Two or more can be placed side-by-side for backyard or picnic use. And they're much easier to handle and transport than one large table. When not in use, they stack on top of each other for storage (the photo shows five tables stacked on top of a garage refrigerator).I received no discount or compensation for my review. I enthusiastically recommend this table.

The table works well for my uses - mainly as a portable work surface for different locations. It is fairly sturdy, if a little bit hard to set up on uneven surfaces. It is light and easy to set up and take down and move.

WORX sidekick portable work table is easy to assemble perfect for small jobs and very sturdy. I would highly recommend it for a table to use in multiple areas, small garage or out in the yard. The orange sliders that are pictured to stabilize wood are included underneath the table(see pic). But when you go to buy the table Amazon suggest that you get four additional for $12.95. I wouldn’t unless you need them for more than one set of stabilizers. The table is a good height, it comes to my waist and I am under 5 feet. It will be a good worktable for my height, although if you are taller you may have to bend over as the legs do not adjust. I don’t believe that the table would be good on uneven ground as the table legs are quite thin, but it has nice wide feet. The top of the table pops on and is held in by turning plastic knobs. It’s not heavy although it is sturdy and if you have hand grip problems it’s easily managed. What I liked about it is that you can fold it up put it away with the legs inside the table. One last note, the orange snap that is pictured holds the table together when it is folded closed but if you have two tables it will snap them together to extend the length of a table for larger jobs. It’s going to be a nice addition to my small garage and workspace.

I do a lot of car audio projects for myself and others. Being a competitor, I am constantly ripping things apart, rewalling my vehicle, etc.With this comes the need for space in my working area. My bench is already full, albeit neat and organized, of tools, subwoofers, amplifiers, etc, and with the table saw, table router, and other large machines in the garage, I don't have a ton of space to "just build another wooden bench", regardless of whether it were on casters or not.Enter these little heroes. I ordered 4 of them right off the get just to see how they performed. These are great! They fold up into what resembles a suitcase with some legs sticking out, and can be stored easily anywhere taking up very minimal space.As far as rigidity and durability, when I first opened up the legs, I have to admit, I was thinking each one of these would shake like a leaf. I was wrong. I sat myself on one just to test the weight and I am six foot two and weigh 265 pounds, it held my weight with ease and then some.I moved back and forth while sitting and also side to side just to see if I could get this thing to move, jump, stagger, etc, nothing at all, just held me.The four of them connect together via rubber interconnects, which is cool. Those could be a little better at their job, but they're not horrible and, when really pressed in, hold the four together fairly well.I've put both of my compound miter saws on these simultaneously (both jigged to different angles for efficiency purposes) with zero issues. They don't jump, they don't push or pull forward, etc.Honestly, for $50, can't go wrong. I would have spent that or more in wood to build something of equivalent size and wouldn't have been able to break it down in less than 5 seconds and store it in less than 2 cubic feet of space.

I gave this to my husband for a Father's Day gift. He absolutely loves it! it is easy to put together and take apart to store. He uses it in the garage regularly and has even asked that I get him a second one. It doesn't take up too much space when it is up and also folded. Very good value for the money spent.

Lightweight yet durabe, quick to assemble, decent price, useful worktable

Es una mesa muy fuerte, estable, y fácil de desarmar, no pesa y es práctica, la he utilizado para poner un equipo de sonido y una máquina de coser, súper cómoda, no vibra al costurar, la recomiendo ampliamente y me voy a comprar otra para hacerla más grande

Excellent quality, sturdy, super easy to set up.

Great little table with so many uses. Very sturdy as well.

The dimensions are a bit strange in that the width doesn’t match with the primary work platform… very strange.