PrimoChill Basic 1/2 Inch PETG Kit

• All in One Kit Designed/Tested to Work Together with Zero Issues.
• Superior Strength to Acrylic Tubing.
• Environmentally Responsible, Safe, and Non Toxic Product.
• Thicker Wall for Safer Operation.

PrimoChill is making PETG even easier to work with. Using our basic kit you have the PETG required for any system and some basic tools to get started. The Reamer/Deburring Tool is provided to clean up the ends of your tube after cutting them to length. This chamfer finish will clean up any burrs and allow for a smoother finish. The combination of Tube Lube and bending insert are included to use in conjunction with the provided 45/90/180 Degree Water Cooling Bending Set. This combo allows you to creates bends of any angle with precision using the heat of your choice. PETG Specifications Inner Diameter: 3/8in Outer Diameter: 1/2in. Wall Thickness: 1/16in. Length: 30in. Compatibility Fittings:1/2in. OD Rigid Fittings Parts Included 6x 30 inch PETG tube 1/2 OD 45/90/180 Degree Bending Set 1/2 OD Reamer/Deburring Tool 3/8 Bending Insert Tube Lube Warnings Use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid Acrylic Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful s is strictly prohibited and will void your warranty. Not responsible for any damage caused by or when using this product. Please use at your own risk. Installation PLEASE NOTE: A bending insert is meant to have a tight fit. Otherwise, the tube will collapse, kink, form air pockets and flat spots when heated. The tighter the fit, the better the result. This process requires patience and practice.The bending insert requires some stretching and lubricating to get it in the rigid tube. 1. Stretch the bending insert. Remove any excess that isn’t stretched. 2. Ream the rigid tube with the reamer to ensure a clean opening for easier insertion. 3. Lubricate by applying several drops of Tube Lube on the bending insert itself and then place several more drops into the rigid tube. 4. Work the bending insert into the rigid tube.