BLACK PLASTIC WELDER

This product is a hit or miss. Many times the black expoxy is dried out and of no use. Complete waste of my $ and time. Once I find a suitable alternative product I won't buy this ever again. When it's not dried out, it works great. The last 4 packages I purchased are dried out !

This stuff works great on ABS plastic. I used it to repair a cracked radiator fan shroud, which has split about 3/4 down the side. I had some reservations, based on some of the other reviews - as well as a review I saw on YouTube by the Project Farm guy. However, I decided to give it a shot and see how it worked. I started by cleaning the plastic shroud with isopropyl alcohol, then used a little brush to make sure the plastic was clean. I then mixed the glue on a paper plate using a little popsicle stick. I think the trick to this glue is to really mix it well. I read a lot of other review were people were complaining that the glue didn't come out evenly or it didn't work. In my case, the glue came out just fine, but if one side or the other is coming out al little more, you just have to shift the pressure on the plunger over to the other side to help equalize things. ** Very important: make sure you remove the built in stirring stick from between the plunger part, otherwise the it's hard to get the glue to come out smoothly. I mixed the glue up really well.. all back and forth, sideways and up and down. Then used the stick to spread it over the ABS plastic of my radiator fan shroud. I used 2 or 3 applications, but even just the first one did the trick. I was totally dry in about 30 to 45 minutes when I checked. It even glued to the wood (the stick I used to mix) and the paper plate. Those two ended up bonded together for life. So it's pretty impressive how fast it setup and how well it worked on the plastic. After applying the 3rd coat, I put some force on the plastic shroud and it didn't budge. I have to give this stuff 5 stars. It setup quickly and seemed to bond very well to the ABS. I wasn't expecting it to work as well as it did actually. It's a plus that it's a nice solid black color also, as it matches black plastic parts a lot better than some of the other glues out there.

I love this stuff. Good price, have been able to fix everything I ever tried to fix with it. Dries quickly, not to messy, sticks to everything. Very strong.

Great product at a great price!! I would highly recommend!! Excellent product and I really love it!! its a Great product at a great price!! I would highly recommend it!! it's an Excellent product and I really love the quality and the description was really accurate. Seller makes a great product and I would highly recommend!!

First off, you need to know what type of plastic you are using this to repair. If the plastic is not specifically listed, it probably won't work with it. This product claims to adhere (stick) to: Rigid materials including ABS, acrylic, fiberglass, FRP, glass, PVC, SMC, steel, styrene, vinyl, and wood. It also specifically says it WILL NOT bond to polyethylene and polypropylene plastics. This includes HDPE (high density polyethylene) which is used in a LOT of products. If the product has a recycle mark on it, it will tell you what class of plastic it is, or mit may just say ABS or HDPE. Next, you need to make sure whatever you are repairing will be worth the $10 or so that you're going to pay for this product, since you need to consider it a one-time use option. The Plastic Welder CAN be stored once opened, but not for long before the black side will dry up and be useless. If you keep it somewhere cool, you will have better longevity storing it. Once you are sure it will work with your plastic, and it will be worth the investment to try to repair it, be sure to properly clean and prep the surfaces. Alcohol is good enough to clean most surfaces. Once both surfaces are clean, mix equal parts together and apply just enough to both surfaces that when you press them together there will be some squeeze out all around. Press them together, and wipe away any squeeze out. If you can, HOLD the 2 parts together for 5 minutes to ensure a good bond. It doesn't take a lot of pressure, just hold them together. Once 5 minutes has passed, it should be set, and you can put it somewhere to allow it to fully cure. The stated cure time is 10 minutes, I would give it at least 30 minutes to an hour (or as long as you can stand to wait). If the plastic parts will be under stress, you may need to reinforce the joint by melting some steel into the plastic to bridge one side to the other. You can use a strip of iron mesh (like metal speaker grills are made of) or you can use a soldering iron and staples or paperclips if there is enough depth to melt them into it. Straight pieces of steel won't help. if you use mesh, no worries. If you use a paperclip or staples, you will need to put some small bends in it to make a zip-zag shape. I have used this product a few times. It works great on ABS plastic. For simple repairs, or to reinforce, or reshape a part, it work great. If it is something that needs to work under stress, you might want to consider "Hot staple welding wire" - just search for it on Amazon. Kits start at $20-$30 that include the Plastic Welder Gun.

I was almost at the end of my rope until I discovered this miracle product. I have been trying to fix a gap in my Kawasaki Ninja plastic fairings. The plastic fairings were not fitting flush because a tab or two had broken off the darn thing. I tried JB Plastic Weld, 3M Plastic Adhesive, Loctite super glue, heck, even the hot glue gun got in the act, all to no avail. None of these products were strong enough to hold the fairings together. Frustrated, I decided to give this Permatex Black Plastic Weld a shot. Lo and behold this stuff really works! I can't believe how strong the bond is. Oh and by the way, the smell is not as bad as some other reviewers portray it to be - I've smelled worse. Regular gasoline smells 10x more than this stuff. The working time on this is around 5 minutes so you have to work quick with it. Have a timer in front of you. Anyhow, I am very glad I bought this, even though I had to wait a few days to get it - it was worth it. All of the Auto Parts stores in my area were out of stock on this Permatex product- although all of them had the JB Weld version in stock, hmmm wonder why... I had to pass up on the rest and try the best. Now my bike looks amazing, no more ugly gap to worry about, thanks to this really outstanding product. In any event, if you are looking to fix your plastic motorcycle fairings, stop right now and buy this product. This is the answer you have been looking for. Enjoy!

I have feeling the seller is purchasing factory 2nds or not storing them correctly. Typically Permapoxy Black Plastic Weld is super high quality. This is my 3rd purchase with this company and the first two were fine until I get to the last 3-4 packs. They always seam like the black resin Part A would get hard over time. I chalked it up to having purchased too many and them sitting over time. However, I just checked Permatex website and it says it should be shelf stable for over 2 years. I checked the manufacturing date under the label and it has a Oct 2025 date on it. Well under the 2 years. Even for the last 2 purchases - they should have lasted longer. The other thing is if the seller is storing this in freezing or a area that gets hot, it could be compromising the integrity of the tubes or epoxy. Either way, it should not do this. I have been using this for years and never had this problem when buying off the shelf. This time I opened up the package they came in that it smelled very strong, like epoxy. I didn't think anything of it until I opened the first package. I could not get the black Part A resin to dispense. I even cut it back a little further and it's solid inside. So, I opened a second pack. Same thing. The 3rd one I opened and it dispensed, however it's been 18 hours and it's still soft on the item I was gluing. I made sure it was a 50/50 mixture as well. This should be rock hard after 30 minutes. Trying to get my money back and return these, however, the seller has a no return policy on these. I messaged them and I guess I'll have to wait. If I don't get a refund - I'll escalate this to Amazon. I'll update this as I get more information.

This is the best plastic weld epoxy glue that I used so far. My favorite used to be Devcon plastic epoxy but then seems like they discontinued it. Had not found a better one since. Tried JB, Loctite, Gorilla and a few more I can't recall. When I tried Permatex black plastic welder, it had the exact same unique horrible toxic like smell as Devcon. Performed equally well. Most of the smell does go away when it's dry. Do yourself a favor and use it in a well ventilated area and not in the house. That smell can linger. I usually take the item I need to glue out in the garage with the garage door open and the smell still gets to me. It is a two part mixture. Mix the two parts well otherwise when it dries it will not harden as well. Throw any leftover mixture in your outside garbage can because that oder is strong. Didn't give it 5 stars because the cap doesn't close properly. It will not snap shut. First time I used it I taped up the cap but after 1 month, it dried up. Bought a new tube a year later and the cap still has the same defect. This time, I wrapped a rubber band to hold the cap tightly. Hopefully it will not dry up again.

Need to fix a broken front bumper tab , this foes exactly what it says , worth the money

O produto veio com a parte preta solidificada, o que inutilizou o seu propósito. Até tentei abrir para ver se algo ainda estava líquido, sem sucesso. Péssima experiência.

Bardzo trwały i szybko wiąże, tubka prosta w użyciu, jedyny minus to podwójna kapka, która nie trzyma się po nałożeniu i trzeba czekać aż klej ją złapie