4 Pack Heavy Duty Leveling Feet, Adjustable Cabinet Leveling Feet

Quality ease of installation for stable leveling. Better that those on most appliances

These leveling feet work very well. My floor is epoxied and not dead flat. I was able to level my bench and make it tock solid! I've incorporated these feet on two of my work benches and the work very well (a third bench to come). My benches are 2x4 framed, with wooden doors & drawers, and a 2x10 top with fiber board laminate. They weigh 100 to 150lbs +. These feet work well for my application. I've also added a set of retractable wheels (see pic) so I can move the bench around as needed. The photos are from my 1st bench with the bronze feet. This was for my fly tying bench. Moving the bench around facilitates cleaning and fetching fly materials that I drop and migrate under the bench. The other bench is a heavy work bench in my garage for automotive and tractor maintenance work. The leveling feet make for a stable and level work surface.

As described.

A guy made me a couple of really nice rifle bench rests out of 2 X 6's. They would have been great on a dirt surface, but the base was not flat enough to sit on my concrete pad without some wobble. These well designed, rugged leveling feet were easy to install, easy to adjust, and eliminated all of the wobble on the now perfectly level bench rests. My only complaint is that the included mounting screws were too small, and I used #10 1 1/2" deck screws into the 2 X 6's instead for a much sturdier mount.

These leveling feet are a simple design that puts the weight of the object you are mounting them on in the correct place. They are made from very good material, easy to install and after installed are easy to adjust and lock in place. Will purchase again when needed.

I used them to repair a Office Desk that was no longer level. It worked great and I was able to level my desk

I used on a heavy 7 ft long cabinet work Bench to prevent it from rolling on wheels. They hold very well I liked how easy they were to install and how they fit under the sidewall and screw to side. Easy to adjust and have no problem lifting wheels off of flooe

Saw this hack on an RV'ing forum. Had to give it a try. Love it! Much easier to level my griddle using these than trying to adjust the folding aluminum camp table. Really happy with this.

I recently used the 4 Pack Heavy Duty Leveling Feet for my workbench in the garage, and I’m really impressed with how well they performed. They were easy to install, and once in place, they did a fantastic job of leveling the bench, even on an uneven floor. The heavy-duty design feels solid and durable, and the feet provide great stability, which is exactly what I needed for a work area that gets a lot of use. They adjust smoothly and hold their position without slipping, making it easy to fine-tune the height and balance of the bench. The quality is definitely there, and they’ve made a noticeable difference in keeping everything steady and secure while I work. Overall, these leveling feet worked perfectly for my setup. They’re sturdy, functional, and really helped improve the stability of my workbench. Highly recommend for anyone looking to level and stabilize heavy furniture or equipment!

Did the job nicely levelling up a cupboard. Beware that the screws supplied are pretty long and if you are planing to attach them to some furniture the screws might go right through the wood and be visible on the outside. I got round that by making small blocks of wood to give extra thickness. You could of course use shorter screws if you have them.

I used these on my lathe stands. I made about 4 stands. They are surprisingly solid and function well. They seem to keep my lathe in place. No movement at all, and great for taking the wobble out my stands. Nice product.

Sturdy design

These units a solid, well made and work great. My only complaint is that the treaded section of the foot adjustor had some razor sharp cuttings left on and it which took me a while to dig out of my fingers. After my encounter with the first one I brushed the others clean and had no more problems.