Yaheetech Office Chair

I just received the chair today and was able to put it together quite quickly. Here's my reviewPositives• Build quality is nice and the chair feels quite sturdy• Fairly simple to assemble. There’s a spare screw provided, ignore.• Very comfortable with good back and hand support• Chair has a slight incline by design which makes it good to sit on• Base is wide and hand rests in the right positions• Height and incline adjustments are easy and simpleNegatives• The main problem I found was the back incline doesn’t stop when the lever is set to incline position and there are chances for falling if you are not careful. The tightening knob doesn’t seem to have any effect on this whatsoever.• Wheels were quite hard to insert so had to use a hammer to drive them in. It was a one off activity so not too fussed about it.I read quite a few negative reviews here before buying I'm not sure those are justified (no I'm not paid or asked to do this review). I bought and returned a couple of cheap chairs on eBay before buying this one so I know what bad looks and feels like. This is a well made chair and good value for money and my personal opinion is that it will last if taken care of. Will add a few photos and add any updates after a few weeks of use.Updated Jan-23Chair's arm broke while I was sat on it and fell upside down with some scratches on my wrist. Tried to contact the seller with no response.

Fairly easy to assemble and looks good .Not the top end of luxury but for the price it is more than worth it .A good basic office chair , probably good for work or students but not a ‘ Gamers ‘ chair or for those who want to lounge in it for long times . I think a chair with padded arm rests would be more suitable.Remember to use the tension knob ( under the seat ) after assembly , to get the best and most comfortable seating arrangement .Well worth the price and was what I expected.

Disclaimer: I just received and assembled the product, only used it for a day.The chair quality is decent and comfortable to sit on for long hours and the turning flexibility is good. It does not have adjustable armrest so the arm might be uncomfortable depending on your height, and the inclination adjustment mentioned is not noticable at all. The assemble is easy for the most part except for the wheels that might need some force.I have to mention their customer support which is great. I have missed all delivery attempt as I am away for travel, they offered to deliver another chair without additional charge.All in all, its a comfortable chair of decent quality and you get what you paid for.

Nice looking chair for the price. Had it a couple of years now but selling it as the back rest leans back too much. Not sure if it was like that when I got it or if it's always been like that but I cannot sit up straight to the chair using the backrest. Tighten the arm screws (which became loose) helped for a little while but no amount of tightening helps now.

I got this as a reasonable coat upgrade to the uncomfortable dining chair I've been say on for the last year, conscious I needed something very usable but not extortionate in cost.I found it easy enough to assemble, minor fiddling with the bolts but only about 10 minutes to build.The back support is nice and comfortable, better than I expected as I normally don't like mesh backs. It's resistant and supportive.Some have raised it tilted too easily but mine is spot on right out of the box. There is also the normal twist-point below the seat (pictured) to adjust the recline tension.It moves easily on my fairly thin carpet. Obviously a thick pile carpet is no good for wheeled chairs, but laminate can cause the wheels to lose grip and slide, increasing tension on the wheel link to the base by dragging. Make sure to get a rug under it if you're on laminate or solid floors!Overall construction is light but decently made, certainly on par with other computer chairs I've had over the years and I'm loving the upgrade!

I would say that you get what you pay for and this chair is really good value for money! However I would at that the customer service is not so great and also the fitting of the holes where the screws sit is not made very well. When built this chair one side of the arms comes up higher than the other by about 2cm. This is because the holes placed on the chair is not in the right position!Contacted seller and sent pictures and they didn’t reply. As I already built the chair I did not want to return it and also cause trouble to arrange a return given we are in lockdown!Read reviews and do your research on other alternative options is what I would suggest. I now have a reasonably comfy chair save for the arm alignment issues!Would not recommend or buy from again.

After scouring the Internet for the cheapest new office chair i found this was the best one. At around £30 and next day delivery you can't go wrong with this.It's easy to assemble, takes no longer than 15 minutes. The screws go into the holes with ease with the provided Allen key.It has the ability to move up and down, which I have had no issues with yet.In regards to the comfort I was actually rather surprised. The only minor downside is that the arms are fixed in place, but I knew this before purchasing and for the price it's fine!Overall it's a decent size and has a nice sleek appearance that will look great with any desk.

I bought this chair for my 10yo and it not bad for the price. Good points: Competitive price point, I like the back rest as it allows for air flow, comfortable seat, sturdy arm rests. Not so good points: Seems a bit low, even when raised to its highest point was lower than my other office chair (hence why good for kids). Also I dont like the fact that when an adult sits, it tends to rock backwards a ever so slightly giving you an uneasy feeling. It does stop at one point especially if you have set the lock that way.