Diamond Brite Paint 46000 1-Gallon Aluminum Paint

Perfect paint!

This paint was easy to roll on and covered the flaws beautifully. Our fence has not been painted in many years and looked like it should be replaced. Decided to try this paint instead and really glad we did. Fence looks like new!

I needed it to try on a RV rubber ( EPDM) roof that was degenerating and nothing water based would stick to and you can't get oil based paints easily in CA. This one was available so I thought I would try it. It's pretty thin but spreads easily and coats fairly well. It stuck to the roofing material and sealed it which is a total money saver. Half a gallon did a 35' roof using a 6" roller because I had it.

The roof on my barn was in good shape but had alot of patina. I used an air sprayer to apply. Went on well and evenly. It took almost a gallon to do 384 sq ft. I recommend this and will be ordering more to do the other side.

I paint a lot. This is superior to any aluminum paint that I have used. Clean your surface with acetone. It seems to be picky about good prep. Fog lightly with the first coat. A little heavier with the 2nd...even out with the 3rd. It is thin, so the extra coat tops it off nicely. The leafing in it makes you look like a better painter than you are! Most paint you have to maintain the sheen...not with this...it levels out nicely for a perfect finish. Use a test surface first. It will run if you are used to other paints. Very forgiving. I wiped a few runs and the other coats covered perfectly. Great for vintage campers!

I used this paint to cover some rusty old sheet metal roofing on a couple sheds. Both roofs would do to be replaced but with the current cost of replacement metal I thought it worth a gamble on the paint. Very rusty places were primed with rust primer and the more sound surfaces got only the aluminum paint. The paint was applied with a wide brush and went on easily, one 400 sq. ft. roof was covered in about 1.5 hours. Procedure was to begin at the high point of the roof and drizzle a brush load onto the roof followed by quick strokes, one brush load would cover maybe 6 sq. feet so it went quickly. Coverage was given as 600 sq. ft. which i doubted initially but sure enough it did cover about 550 sq feet of metal and some was left over. The surface looks aluminum shiny and gives the impression of being durable. That's the remaining question, how long the material will last. Of course that's unknowable but so far I'm quite impressed with the product.

The can came in a carton box all over crashed, luckily not broken. Paint quality is good.

Exceptionally good product. Customer assistance was quick and helpful. This product needs to be mixed thoroughly before application since it contains actual aluminum. Particulates settle out. You can spray this product with a regular siphon spray gun that is used to paint automobiles. You may need to boost the pressure to accommodate the particulates, but other than that no commercial sprayer is needed. Test spray the product to determine the best spray pattern for your application. Cold surfaces will tend to run quicker as will non porous surfaces. This product covers well. Finished result is bright as the name indicates and hard as another reviewer stated. Spray when weather report suggest at least 24 hours of drying time, because this paint requires additional time to fully set. Would strongly recommend this product.

very good paint , receve it little bit damaged by the transport but it's , compagnie prompltly refund 30$ for inconveniance . very good finish