- ONLY SEKONIC METERS THAT ARE SHIPPED BY AND SOLD BY AMAZON.COM OR OTHER AUTHORIZED SEKONIC DEALERS CAN ENSURE THAT YOU ARE RECEIVING GOODS THAT HAVE PROPER FCC COMMUNICATION AND ARE COVERED BY A USA WARRANTY. THE AMAZON OFFER MAY BE SEEN TO THE RIGHT. GREY MARKET SEKONIC METERS WILL NOT APPLICABLE FOR A US WARRANTY..
- Ideal prime or back-up meter for still photography and cinematography use.
- Amorphous photocell requires no batteries or external power source..
- ISO range 6 to 12,000 in 1/3 step increments.
- 60-seconds to 1/8000th, f/0.7 to f/128, 8-fps to 128-fps.
Product Description
-------------------
Sekonic has redesigned their popular analog light meter
to more current industry standards. The Studio Deluxe III L-398A
retains all of the legendary features and benefits of its
predecessor. Using an environmentally-friendly amorphous silicon
photocell, Sekonic can continue to offer the popular L-398
battery-free. The L-398A offers both "Still" and "Cine" shooters
the familiar features and repeatable accuracy expected from
Sekonic.
From the Manufacturer
---------------------
------------------------
L-398A Studio Deluxe III
------------------------
The classic photo meter tracing its roots to the famous Norwood
Director, the Sekonic L-398A has become a favorite with
cinematographers the world over. A pure analog experience, the
meter needle and exposure dial system gives you all reading
combinations at a single glance. And because it uses an amorphous
photocell that generates its own power, there is no need for a
battery.
Incident measurements can be taken with the over 180-degree
Lumisphere for general readings of three-dimensional objects, or
with the Lumidisc selective area readings, measuring the lighting
ratios between highlights and shadow areas or light falling on
flat-field objects such as artwork, measurements outdoors or
under bright studio lights. The Sekonic L-398A's swivel head
allows you to hold down the metering button and "walk the set" to
check light levels. Release the button, and the needle locks down
the meter's analog display needle for easy-to-read exposure
calculations. Exposures are displayed for both still and cine
applications.
For reflected readings, a flat Lumigrid replaces the Lumisphere.
If you plan on shooting with a fixed ISO and shutter speed, an
optional Slide Set (Direct Reading Slides) makes it easier to
take readings in fast-paced shooting scenarios. The Sekonic
L-398A Studio Deluxe III makes an ideal prime or back-up meter
for still or motion picture shooters.
Instant reading of full range of aperture/shutter combinations
The analog dial gives you full range of exposure settings for
both still and cine applications at a single glance. The analog
needle indicates the brightness in foot-candles.
Amorphous photosensor eliminates need for batteries The photocell
in this meter generates its own energy to move the analog meter
needle. The L-398A is always ready to go. There is no need to
change batteries.
Swivel Head to position incident dome and maintain full view of
display Easily position the Lumidome for best light reception as
you position the meter body for best reading. The swivel head
enables “walking the set" to check the evenness of light levels.
Continuous reading plus needle lock for easy and accurate
readings Press and hold the measuring button to take continuous
readings in varying conditions. Release the measuring button to
lock the analog needle in place for exposure calculation.
Lumidisc for adjusting illumination contrast and measuring
illumination intensity Take selective area readings or measure
several lights for ratios between highlights and shadow areas.
Also used for measuring light falling on flat-field objects such
as green-screens and artwork.
Lumigrid for measuring reflected light Replace the Lumisphere
with the Lumigrid to take reflected light readings of subject
areas from the camera position. An optional Slide Set (Direct
Reading Slides) enables adjusting the reading meter’s reading
range for bright subjects.
Memory pointer retains prior reading Just align the pointer with
the analog needle to transfer brightness readings to the exposure
dial. Once set, a second reading can be made to compare
brightness of different lights to adjust light ratios.
Accessories Supplied with Lumisphere, Lumidisc, Lumigrid,
High-slide, case and neck cord. Set of 11 direct reading slides
sold separately
-------------------------
Technical Specifications:
-------------------------
Type: Analog exposure meter for ambient light Receptor Head:
Rotating Domed Head 90° to the right, 180° to the left,
Removeable for Contrast Reading Light Receiving Method: Incident
light and reflected light Receptor Incident Light:
Interchangeable Lumisphere and Lumidisc Receptor Reflected Light:
Interchangeable Lumigrid Light Receptor Element: Amorphous
silicon photocell
Measuring Range and Modes
Measuring Modes Ambient Light: - Aperture priority metering
- EV metering
- Shutter priority metering
Measuring Range (ISO 100) Ambient Light: - Incident light: EV 4
to EV 17
- Reflected light: EV 9 to EV 17 Repeatability Repeat Accuracy:
(+/-) 0.3 EV or less Calibration Constant Incident: Lumisphere C
= 340 Calibration Constant Reflected: K = 12.5
Display Range and Modes
Display Range Film Speed: ISO 6 to 12000 (in 1/3 steps) Display
Range Shutter Speeds Ambient: 60 min to 1/8000 sec. (in 1, 1/2,
1/3 steps) Display Range Aperture: f/0.7 to f/128.0 (in 1, 1/2,
1/3 steps) Display Cine Speeds fps: 8 fps -128 fps Display Range
Analog Scale Aperture: f/.7 to f/128 (in 1, 1/2 or 1/3 steps)
Display Range Analog Scale Shutter Speed: 60 sec. to 1/8000 sec.
(in 1, 1/2 or 1/3 steps)
Other
Battery Power Indicator Display: Battery Capacity Checker Button
and Guide Needle Battery(Power): Self-powered: Selenium photocell
eliminates need for batteries
Dimension and Weight
Product Dimensions: 4.40x2.30x1.30 in./11.20x5.80x3.30 cm
Product Weight: 0.40lbs./0.20kg.
Item Includes:
L-398A Case, Strap, Lumidisc, Lumigrid and High Slide